We need your help now
Support from readers like you keeps The Journal open.
You are visiting us because we have something you value. Independent, unbiased news that tells the truth. Advertising revenue goes some way to support our mission, but this year it has not been enough.
If you've seen value in our reporting, please contribute what you can, so we can continue to produce accurate and meaningful journalism. For everyone who needs it.
Sign in. It’s quick, free and it’s up to you.
An account is an optional way to support the work we do. Find out more.
By continuing, you are indicating that you accept our Terms of Service and Privacy Policy.
A SLIP ROAD on to the M50 is closed and won’t reopen for a number of hours this morning after a truck overturned, causing a fluid spill.
The incident happened on the slip road from the Naas Road outbound onto the M50 northbound.
M50 Dublin / TwitterSlip road from N7 to M50 J9 N'bound as emergency services work to clear overturned truck. Please follow diversions. pic.twitter.com/YbbvCeBQCS
— M50 Dublin (@M50Dublin) March 21, 2016
Emergency services are attending the scene and motorists are being diverted from the area.
Those intending to get on the M50 northbound coming from the city are asked to get on the M50 southbound to the Ballymount exit and then back onto the M50 northbound.
Gardaí have confirmed that a crane will be needed to remove the truck.
An Garda Síochána / TwitterPicture of overturned truck on M50 Junction 9 Northbound, at slip road pic.twitter.com/Yuot3kF0sp
— An Garda Síochána (@GardaTraffic) March 21, 2016
No one was injured in the incident.
To embed this post, copy the code below on your site
Nothing wrong with the slip road it’s the idiots going to fast on it.
Being honest, for a driver not familiar with the area, it’s a terrible slip road to have linking to a motorway.
They are badly designed! They have had to shoehorn in the junctions, hence the ridiculously low speed limits. Those tight turns should have been built with a banked turn.
That slip road is treacherous, no doubt it’ll happen again. Absolutely terrible design.
People just don’t take the speed limits seriously on those slip roads, they’re 30km/h for a reason.
Not if you abide by the speed limit.
…….speed limit and road conditions.
They’ll be another crash yet on the m50, everyone is slowing down to take a look at it…
Bad engineering. To have a slip road that requires a 30kmh limit amongst a road network that runs at 80, 100 and 120kmh is bad design and bad engineering. Its all too easy to underestimate the severity of that bend when you may have been cruising at 100 or 120kmh for some hours. Higher impact signage is required, for starters. Hope the driver is physisally unscathed.
He was coming off the nass rd which is 60 kph he just had to half his speed , poor driving and should have licence taken off him
Shocking devastation in the country this weekend.. rip to all.. hope the driver is ok..
Unless im mistaken, there are speed signs saying 30km on approach to this bend. Again, idiots driving too fast.
Never ceases to amaze me how so many people are possessed of the ability to conduct complex accident investigations from their keyboards.
Unless you’ve driven one of these trucks you can’t say he was driving too fast,maybe the trailers load shifted causing the vehicle to turn over , a truck can tip over at a lot less than 30 kph.
Go around a left turn fast Neal, what way do you feel yourself leaning?
It’s not only that slip road were there is a problem but also the slip road for finglas and the one from the M50 going onto the M1 city bound.I have drove over in the UK and have never come across slip roads like the ones on the M50 and M 7. Also a truck can be flipped on its side travelling at 12km,Maybe the load inside the trailer shifted while the truck was going around the slip road.
The bigger issue here is how feckin long it takes them to remove it…..standing around gawking instead of coming up with a efficient emergency response to have it righted..
Know much about Artic driving Michael ? The load in the back could have shifted, he may have had brake fade…. loads of things could have happened that you obviously know nothing about.
Seems odd that a truck managed to keel over on it’s right side while going around a left-curving sliproad.
Please tell me you’re not serious
What way do you expect it to turn ?
Leave him alone. Not everyone went to school the day they did centrifugal forces in science class.
Troll account. Ignore.
How do you know he was speeding ?
the quality of motorway ramps and exits are the worst in europe. why its possible to do very tight bends where you need to drive at 20 km/h from 100km/h on motorway. very bad design
Anybody now what shop this container was going to.
have your say